Loading... Please wait...

Push Fit Pole Flow Control Valve/Tap (8mm)

  • Push Fit Pole Flow Control Valve
Price:
£8.29 +VAT


Product Description

WFP Water Fed Pole Stop Tap for Window Cleaning 8mm

To fit 8mm Outside Diameter pole hose (e.g. Aqua-dapter® Pole Hose).

This Water Fed Pole Flow Control Valve can be fitted in a few seconds and used either to switch water on or off, or regulate flow when using another tap (e.g. Aqua-dapter)

To fit:

  1. Fully extend your pole and mark the hose at least 1m from the base of the pole.  Make sure there is still enough hose from the mark to your hose connector.
  2. Cut the hose using scissors (or a hose cutter if you have one)
  3. Insert an optional tube strengthener into each end of the hose where you have cut it
  4. Firmly push each end of the hose into the 2 push-fit connectors on the valve


To be able to fit this to your pole hose you will need to have the correct outside diameter hose on your pole of 8mm. If you have thicker hose currently, you would need to purchase a suitable length of our 8mm Aqua-dapter® hose.


comments powered by Disqus

You Recently Viewed...